Fibre Channel Products

Fibre Channel networks with various upper level protocols (ULPs) are used in a variety of high-speed mission systems. Within a mission system Fibre Channel provides a high-bandwidth and low-overhead interface solution. Fibre Channel IP cores are primarily used for data transport to/from processors, sensors, and storage. When used in different configurations Fibre Channel offers switched fabric, point-to-point, and arbitrated loop topologies.


Fibre Channel Cards, Appliances, & IP Cores

  • V1141 Quad-Port PMC/XMC FPGA Card

    The V1141 is the lowest power and most secure programmable networking card available. This PMC/XMC solution is designed to provide real time high-bandwidth network interfaces in a secure and lower power architecture. More >

  • V1151 Quad-Port XMC FPGA Card

    The V1151 is the industry’s most advanced XMC solution designed to provide a real time high-bandwidth network interface and processing module for next generation signal intelligence systems. More >

  • V1152 12-Port XMC FPGA Card

    The V1152 is the industry’s most dense XMC network IO solution designed to provide a real time high-bandwidth network interface and processing module for next generation signal intelligence systems. More >

  • V1153 12-Port Rugged XMC FPGA Card

    The V1153 is designed for rugged high-bandwidth networking and interface applications. The V1153 supports 12 full-duplex optical ports operating at up to 25Gb/s per port over a -40 to +85C temperature range. This VITA 20 compliant XMC module can provide high-density interface offload and data processing capabilities in a rugged, low SWaP package. More >

  • V1163 12-Port Rugged XMC ACAP Card

    The V1163 is a powerful heterogeneous computing XMC with high bandwidth IO featuring the Xilinx® Versal™ Adaptive Compute Acceleration Platform (ACAP) and rugged optical and electrical IO. More >

  • V5051 Quad-Port PCI Express FPGA Card

    High density FPGA PCIe Card for next generation data distribution, processing, and networking systems with support for 1/10/25/40/100G Ethernet and 1/2/4/8/16/32G Fibre Channel. More >

  • V5052 16-Port PCI Express FPGA Card

    High density FPGA PCIe Card for next generation data distribution, processing, and networking systems with support for 1/10/25/40/100G Ethernet and 1/2/4/8/16/32G Fibre Channel. More >

  • 32-Port Programmable Switch

    The Programmable Switch is a high port-density completely FPGA-based network switch built for special purpose switching, bridging, and monitoring applications. More >

  • FC Link Layer (LL) IP Core

    The Fibre Channel (FC) Link Layer core provides a complete IP solution for FC-1 and FC-2 layers. More >

  • FC Anonymous Subscriber Messaging (ASM) IP Core

    Hardware-based full-network stack implementation of FC-AE-ASM. Provides hardware-based label lookup, DMA controllers, and message chain engines. F-35 compatible interface mode available More >

  • FC Upper Layer Protocol (ULP) IP Core

    Hardware-based full-network stack implementation of FC-AE-RDMA or FC-AV. Provides hardware-based buffer mapping, DMA controllers, and message chain engines. F-18/F-15 compatible interface mode available. More >

PMC/XMC Fibre Channel Solutions

PMC/XMC form factor cards are extremely rugged and are designed for embedded computing applications. The rugged nature of PMC/XMC cards allows them to be dropped, rattled or used in extremely high temperature environments. In addition, our PCI Mezzanine and Switched Mezzanine cards have the capability of being completely customized to your unique specifications.

PCI Express Card Fibre Channel Protocol

PCI Express FPGA cards allow for extremely high bandwidth communication between a processor on the motherboard and the network interface. PCIe FPGA cards can be utilized for server and desktop applications that are not intended for embedded computing applications.

Fibre Channel IP Core Capabilities

Fibre Channel IP cores cater to system implementations that do not conform to any New Wave DV off-the-shelf form factor hardware. Our IP cores provide specific design files that can be implemented into your custom form factor and system design. Our FPGA IP core licensing allows a company to transfer our IP onto their parts to create a fully customized form factor design implementation. This process can provide unique benefits for both test and embedded computing applications. New Wave’s Fibre Channel protocol IP cores can be applied into both rugged and non-rugged customized Fibre Channel cards.

Contact us for Fibre Channel cards and FPGA IP cores for your application.

New Wave DV Fibre Channel Solutions

New Wave DV is an expert in Fibre Channel solutions for critical mission systems and offers a range of FPGA-based board level, as well as FPGA IP core solutions to meet a wide range of industry needs. New Wave DV also provides both test applications and embedded applications focused Fibre Channel products. All products are purpose-built to provide port-dense and SWaP-optimized solutions with superior bandwidth and latency performance.

Each Fibre Channel board level product is delivered with the customer’s chosen FPGA IP loaded on the board (FC-LLFC-AE-ASMFC-ULP). This suite of IP is what enables New Wave DV to provide full Fibre Channel hardware offload including: hardware based ULP handling, table label lookups, and hardware DMA controllers. New Wave DV offers solutions that provide up to 32 ports of Fibre Channel in a single FPGA.

Contact us for Fibre Channel cards and FPGA IP cores for your application.

This site uses cookies to improve functionality and performance. By browsing this site you are giving consent to the use of cookies.

Accept Cookie Policy for Details