V5054 30-Port 1394b AS5643 PCI Express FPGA Card
The V5054 is the highest density 1394b PCIe card available on the market. The V5054 has been designed specifically for 1394b AS5643 aerospace application development and test stand purposes. The V5054 provides thirty front panel transformer-coupled 1394b ports (optionally the V5054 can be provided without transformer-coupled ports). The host interface provided is Gen3 x 8 PCIe.
Two different link/application layer cores are available from New Wave DV pre-loaded on the V5054:
- An industry standard OHCI interface with the New Wave DV addition of hardware-based offload of the AS5643 STOF.
- An AS5643 hardware offload engine providing complete packet formation, ASM label checking, and direct DMA with the host.
The thirty front panel ports are perfect for lab environments, emulation environments, or developments where front panel ports are desired.
New Wave DV also offers an optional breakout-panel that cables all 30 ports from the board’s high-density connector to a 19-inch rack-mounted 1U panel populated with industry standard 1394b connectors for easy access to and connector strain relief.
Get This Card Pre-Loaded with One of the Following IP Cores:
1394b PHY 1394b OHCI Link Layer 1394b GP2Lynx Link Layer 1394b AS5643
Features
- Thirty transformer-coupled ports (optionally non-transformer-coupled)
- Physical ports are configurable for up to ten different 1394b nodes, with three ports in each node
- Two separate link/application layers and host interface options offered:
- Open Host Controller Interface (OHCI)
- Direct DMA with AS5643 hardware offload
- Xilinx Kintex UltraScale FPGA (KU115)
- Supports PCIe Gen3 x 8
- PPS time synchronization with nSec resolution
- Thermal sensors for monitoring card temperature
- Robust FPGA development framework
- Linux and Windows drivers available
Benefits
- High density 1394b PCIe FPGA Card for SAE-AS5643 aerospace applications and test stands
- Supports transformer-coupled S100/S200/S400 data rates
- A COTS solution optimized for SWaP (size, weight and power)
- Programmable FPGA with a powerful development framework
- Next generation host interface connection bandwidths
- STOF offload for superior timing tolerance and test repeatability
- Wide range of FPGA sizes and memory configuration options
SpecificationsSpecs
Network Interface |
Thirty transformer-coupled 1394b ports on front panel |
FPGA Device |
Xilinx Kintex UltraScale (KU115) |
Memory |
One bank of 4GB to 18GB 72-bit up to 1066MHz DDR4 SDRAM One bank of 36Mbit to 144Mbit 18-bit 1066MHz QDR-IV SRAM |
Flash |
One 32MB memory for storing a default configuration image |
Host Interface |
PCI Express Gen3 x 8 |
External Interface |
32 differential pairs (user-configurable) PPS Interface for time synchronization with µsecond resolution RS-232 serial interface for debug |
Thermal Sensors |
2 digital temperature sensors |
Compliance |
PCI Express Card Electromechanical Specification, Rev 2.0 IEEE FCC 47 CFR Part 15, Subpart B, Class A (USA) IEC 60950-1 (International) RoHS Directive 2002/95EC |
Dimensions |
111.15mm height 254 mm length (card)* *see datasheet for optional power connector spec details |
Power Requirements |
Maximum 65W (preliminary) |
Temperature |
Operating: 0 to 45°C Storage: -40˚ C to 85˚ C |
Applications App
- Emulators/Simulators for aerospace subsystems
- Manufacturing test equipment
- Design validation/verification