V1121 Dual-Port XMC FPGA Card
*This card is no longer recommended for new designs. Please see the V1151 Quad-Port XMC FPGA Card for comparable functionality.
The V1121 is the industry’s leading XMC solution that is designed to provide real-time high-bandwidth network interface for next-generation radar and signal intelligence systems. The V1121 features two 10 Gigabit Ethernet SFP+ optical interfaces and supports the UDP, ARP and ICMP communication protocols. Its advanced architecture and built-in Ethernet offload capabilities provide data transfer at sustained rates exceeding 9.2Gbps.
Unique in its ability to directly transfer data between 10 Gigabit Ethernet networks and FPGA devices, the V1121 minimizes the size and power footprint of systems by obviating the need to introduce additional processors solely to run Ethernet communications. A Streaming Front End (SFE), which is a small core that resides on the FPGA device, provides an independent interface to each 10 Gigabit Ethernet channel on the V1121. The FPGA device communicates with the V1121 over XAUI running across the Pn5 connector, as per VITA 42.6 standard.
In addition, the V1121 is uniquely suited to system architectures involving multiple processing cards on a common switched data plane. Specifically, the V1121 supports shared access from multiple host processors, enabling it to function as a cost-effective, high-performance 10 Gigabit Ethernet gateway. This feature enables a single high-speed pipe to carry multiple virtual channels in systems that need to spread or load balance sensor data across processor farms. When used as a gateway, the V1121 support PCI Express over the Pn5 connector for processor communication and comes with high-level APIs for control and data transfer resulting in a simplified programming model.
Get This Card Pre-Loaded with the Following IP Core
ExpressXG
Features
- Two 10 Gigabit Ethernet SFP+ optical ports
- Built-in UDP offload engine for real-time communication
- Supports PCI Express and XAUI host interfaces
- Available with streaming front-end FPGA core for quick sensor integration
- Available with advanced APIs that support multi-core and multi-processor architectures
- Thermal sensors for monitoring card temperature
- Available in air and conduction-cooled XMC form factor
Benefits
- Provides high-bandwidth 10 Gigabit Ethernet communications for next-generation radar and signal intelligence systems
- Supports real-time data streaming directly from sensors
- Adapts with evolving application requirements providing a technology contingency plan
- A COTS solution reduces system size, power footprint, and cost
SpecificationsSpecs
Network Interface |
2 10GBASE-SR or 10GBSASE-LR SFP+ optical ports |
Ethernet Protocols |
UDP, ARP, ICMP, Multicast, Broadcast |
FPGA Device |
Xilinx Virtex-5 LX110T or LX155T |
Memory |
2 banks of 0.5GB or 1GB 64-bit 266MHz DDR2 SDRAM |
FLASH |
2 32Mb memory for storing a default configuration image and a recovery image |
Host Interface |
PCI Express x8 or XAUI over Pn5 |
External Interface |
42 single-ended user I/O on Pn4 |
Thermal Sensors |
2 digital temperature sensors |
Compliance |
VITA 42.3 VITA 42.6 IEEE 802.3ae 2002 LAN |
Dimensions |
74 mm (width) x 149 mm (length) |
Power Requirements |
Maximum 12W |
Temperature |
Operating: -10°C to 70° C Storage: -40° C to 85° C |
MTBF |
175,000 Hours MIL-HDBK-217F |
Applications App
- High bandwidth sensor interface
- Mission system network interface
- Network offload applications
- Deep packet inspection
Documentation Doc
Datasheet | V1121-Dual-Port-XMC-FPGA-Card |
Product Image - Featured | V1121 Featured |
Product Image - Front | V1121 Front |
Product Image - Back | V1121 Back |