Products

  • V1160 Dual-Port 100G Rugged Ethernet XMC Card

    The industry's most advanced Ethernet XMC for 10/25/40/50/100Gbs Ethernet in high-bandwidth, low-latency applications. More >

  • V1161 Programmable 100G Rugged Ethernet XMC ACAP Card

    The industry's leading Ethernet NIC ASIC plus ACAP (FPGA) for 10/25/40/100Gbs Ethernet and mixed protocol designs. More >

  • V1163 12-Port Rugged XMC ACAP Card

    The V1163 is a powerful heterogeneous computing XMC with high bandwidth IO featuring the Xilinx® Versal™ Adaptive Compute Acceleration Platform (ACAP) and rugged optical and electrical IO. More >

  • V1151 Quad-Port XMC FPGA Card

    The V1151 is the industry’s most advanced XMC solution designed to provide a real time high-bandwidth network interface and processing module for next generation signal intelligence systems. More >

  • V1152 12-Port XMC FPGA Card

    The V1152 is the industry’s most dense XMC network IO solution designed to provide a real time high-bandwidth network interface and processing module for next generation signal intelligence systems. More >

  • V1153 12-Port Rugged XMC FPGA Card

    The V1153 is designed for rugged high-bandwidth networking and interface applications. The V1153 supports 12 full-duplex optical ports operating at up to 25Gb/s per port over a -40 to +85C temperature range. This VITA 20 compliant XMC module can provide high-density interface offload and data processing capabilities in a rugged, low SWaP package. More >

  • V1141 Quad-Port PMC/XMC FPGA Card

    The V1141 is the lowest power and most secure programmable networking card available. This PMC/XMC solution is designed to provide real time high-bandwidth network interfaces in a secure and lower power architecture. More >

  • V1142 Quad-Port 1394b-AS5643 XMC FPGA Card

    The V1142 provides the industry's only completely FPGA-based 1394b-AS5643 interface solution in a PMC/XMC form factor. More >

  • V1144 12-Port 1394b-AS5643 XMC FPGA Card

    The V1144 provides the industry's highest density 1394b-AS5643 test and development card with 12 front-panel transformer-coupled 1394b ports. More >

  • V1146 9-Port 1394b-AS5643 XMC FPGA Card

    The V1146 is the perfect solution for rugged and high density 1394b applications where backplane IO is desired. More >

  • 9-Port Mil1394 PMC OHCI Adapter Card

    Nine-Port PMC suited for 1394b connectivity providing tri-bonded OHCI Link Layer and PHY lanes via high-density 68-pin connection. More >

  • V5051 Quad-Port PCI Express FPGA Card

    High density FPGA PCIe Card for next generation data distribution, processing, and networking systems with support for 1/10/25/40/100G Ethernet and 1/2/4/8/16/32G Fibre Channel. More >

  • V5052 16-Port PCI Express FPGA Card

    High density FPGA PCIe Card for next generation data distribution, processing, and networking systems with support for 1/10/25/40/100G Ethernet and 1/2/4/8/16/32G Fibre Channel. More >

  • V5054 30-Port 1394b AS5643 PCI Express FPGA Card

    The V5054 is the highest density 1394b PCIe card available on the market. The V5054 has been designed specifically for 1394b AS5643 aerospace application development and test stand purposes. More >

  • CaptureXG™ 1000 Quad-Port Capture PCI Express FPGA Card

    New Wave DV delivers the highest port density, lowest cost-per-port capture cards on the market without sacrificing performance or features. More >

  • Triple-Port 1394b PCIe OHCI Adapter Card

    Three-Port PCIe board suited for Single-Node IEEE-1394b connectivity, providing OHCI Link Layer and PHY lanes at a variety of rates. More >

  • 9-Port Mil1394 PCIe OHCI Adapter Card

    9-Port PCIe providing quad-bonded 1394b connectivity, providing OHCI Link Layer and PHY lanes at a variety of rates. More >

  • Triple-Port 1394b PCI OHCI Adapter Card

    Single-node 1394b adapter card with non-transformer-coupled transceivers. Switch-configurable port speeds. More >

  • NI PXIe-6592 ARINC 818 Test Solution

    Suite of test tools for ARINC-818 including data generation, image display, error detection, error injection, and link quality monitoring. More >

  • NI PXIe-6593 Serial RapidIO® Protocol Data Recorder

    Captures and records data from two SRIo endpoint. Supports 1x, 2x, and 4x lane widths at 1.25, 2.5, 3.125, 5 Gbps. Record 1TB+ sessions at 20Gbps. More >

  • NI PXIe-6593 Serial RapidIO® Protocol Endpoint Offload

    Supports two independent sRIO endpoints. Each SRIO port is automatically managed and maintained by the FPGA and requires no host/software interaction. A powerful data generation engine uses a script-based approach to precisely generate test patterns and emulate sRIO sensors/systems. More >

  • NI PXIe-6594 Ethernet Test Solution

    Available for 10G,25G,40G, or 100G Ethernet, this tool allows the precise capture, generation, and analysis of high speed Ethernet data in LabVIEW. More >

  • NI PXIe-6594 sFPDP Test Solution

    A flexible tool for test environments that allows the user to record up to 8 simultaneous channels of SFPDP data and/or send up to 8 simultaneous channels of user defined data. Supports VITA 17.1 or VITA 17.3. More >

  • NI PXIe-7902 Ethernet Test Solution

    Up to 12 channels of precise IPV4/IPV6 PRBS generation and checking at configurable data rates. More >

  • NI PXIe-7902 sRIO® Test Solution

    Up to 6 user controlled SRIO ports for system configuration and network interfacing. More >

  • Mil1394 Single Node Repeater

    3-port, transformer-coupled 1394b repeater/hub, supporting S200β and S400β rates. Extend cable distances and create scalable tree topologies. More >

  • iRepeater Handheld Test Module

    Quickly and easily detects 1394b wire harness and module connectivity issues. Great for non-flight assembly or diagnostic applications. More >

  • iVeriPHY Mil1394 Handheld Test Module

    Standalone single node IEEE-1394 bus tester designed to provide point-to-point and network diagnostic information. Expandable for additional diagnostic capability. More >

  • 9-Channel Bus and Node Monitoring Test Set

    Monitor up to nine independent IEEE-1394-2008 Beta buses for bus resets and number of nodes present on the bus without need of an external PC. More >

  • Mil1394 Dual Quad-Port Repeater Hub

    Two node, transformer-coupled quad-port repeater hub for 1394b AS5643 More >

  • ExpressXG IP Core

    Complete FPGA design providing Ethernet interface IP, external memory interfaces, DMA controllers, PCIe interface, and software drivers. This IP provides out-of-the-box operation of an FPGA-based Ethernet interface. Easy to add custom features for specific applications. More >

  • FC Link Layer (LL) IP Core

    The Fibre Channel (FC) Link Layer core provides a complete IP solution for FC-1 and FC-2 layers. More >

  • FC Anonymous Subscriber Messaging (ASM) IP Core

    Hardware-based full-network stack implementation of FC-AE-ASM. Provides hardware-based label lookup, DMA controllers, and message chain engines. F-35 compatible interface mode available More >

  • FC Upper Layer Protocol (ULP) IP Core

    Hardware-based full-network stack implementation of FC-AE-RDMA or FC-AV. Provides hardware-based buffer mapping, DMA controllers, and message chain engines. F-18/F-15 compatible interface mode available. More >

  • 1394b PHY IP Core

    AS5643 PHY layer hardware implementation. Includes standard PHY-Link interface. More >

  • 1394b OHCI Link Layer IP Core

    AS5643 OHCI Link layer hardware implementation. Includes standard PHY-Link interface and AXI bus for PCIe or embedded processor interface. More >

  • 1394b GP2Lynx Link Layer IP Core

    AS5643 GP2Lynx Link layer hardware implementation. Includes standard PHY-Link interface. More >

  • 1394b AS5643 IP Core

    Hardware-based full-network stack implementation of AS5643. Provides hardware based label lookup, DMA controllers, and message chain engines. F-35 compatible interface mode available. More >

  • Serial Front Panel Data Port (sFPDP) IP Core

    The sFPDP core provides a complete hardware implementation of the ANSI/VITA 17.1-2015 specification supporting full-bandwidth operation with an easy to integrate frame interface. More >

  • ARINC-818 IP Core

    The ARINC-818 core provides a complete hardware IP solution for the ARINC-818 protocol. More >

  • HOTLink II IP Core

    Complete layer 2 hardware implementation for HSI. Provides easy to integrate frame interface. Supports full-rate, ½ rate, and ¼ rate operation as specified by the standard. F-18 compatible interface implementation. More >

  • High Speed Data Bus (HSDB) IP Core

    Complete PHY and Mac layer hardware implementation for HSDB. Provides easy to integrate frame interface. F-22 compatible interface implementation. More >

  • Copper IEEE-1394b SFP

    Industry-trusted copper transceivers providing IEEE-1394b connectivity supporting a variety of rates. More >

  • Fiber Optic IEEE-1394b SFP

    Industry-trusted fiber optic transceivers providing IEEE-1394b connectivity supporting a variety of rates. More >

This site uses cookies to improve functionality and performance. By browsing this site you are giving consent to the use of cookies.

Accept Cookie Policy for Details