V1121 Dual Channel 10 Gigabit Ethernet XMC

The V1121 is the industry’s leading XMC solution that is designed to provide real-time high-bandwidth network interface for next-generation radar and signal intelligence systems. The V1121 features two 10 Gigabit Ethernet SFP+ optical interfaces and supports the UDP, ARP and ICMP communication protocols. Its advanced architecture and built-in Ethernet offload capabilities provide data transfer at sustained rates exceeding 9.2Gbps.

Unique in its ability to directly transfer data between 10 Gigabit Ethernet networks and FPGA devices, the V1121 minimizes the size and power footprint of systems by obviating the need to introduce additional processors solely to run Ethernet communications.  A Streaming Front End (SFE), which is a small core that resides on the FPGA device, provides an independent interface to each 10 Gigabit Ethernet channel on the V1121. The FPGA device communicates with the V1121 over XAUI running across the Pn5 connector, as per VITA 42.6 standard.

In addition, the V1121 is uniquely suited to system architectures involving multiple processing cards on a common switched data plane. Specifically, the V1121 supports shared access from multiple host processors, enabling it to function as a cost-effective, high-performance 10 Gigabit Ethernet gateway. This feature enables a single high-speed pipe to carry multiple virtual channels in systems that need to spread or load balance sensor data across processor farms. When used as a gateway, the V1121 support PCI Express over the Pn5 connector for processor communication and comes with high-level APIs for control and data transfer resulting in a simplified programming model.

Features

  • Two 10 Gigabit Ethernet SFP+ optical ports
  • Built-in UDP offload engine for real-time communication
  • Supports PCI Express and XAUI host interfaces
  • Available with streaming front-end FPGA core for quick sensor integration
  • Available with advanced APIs that support multi-core and multi-processor architectures
  • Thermal sensors for monitoring card temperature
  • Available in air and conduction-cooled XMC form factor

Benefits

  • Provides high-bandwidth 10 Gigabit Ethernet communications for next-generation radar and signal intelligence systems
  • Supports real-time data streaming directly from sensors
  • Adapts with evolving application requirements providing a technology contingency plan
  • A COTS solution reduces system size, power footprint, and cost

Specifications

Network Interface

2 10GBASE-SR or 10GBSASE-LR SFP+ optical ports

Ethernet Protocols

UDP, ARP, ICMP, Multicast, Broadcast

FPGA Device

Xilinx Virtex-5 LX110T or LX155T

Memory

2 banks of 0.5GB or 1GB 64-bit 266MHz DDR2 SDRAM

FLASH

2 32Mb memory for storing a default configuration image and a recovery image

Host Interface

PCI Express x8 or XAUI over Pn5

External Interface

42 single-ended user I/O on Pn4

Thermal Sensors

2 digital temperature sensors

Compliance

VITA 42.3

VITA 42.6

IEEE 802.3ae 2002 LAN

Dimensions

74 mm (width) x 149 mm (length)

Power Requirements

Maximum 12W

Temperature

Operating: -10°C to 70° C

Storage: -40° C to 85° C

MTBF

175,000 Hours MIL-HDBK-217F

Applications

  • High bandwidth sensor interface
  • Mission system network interface
  • Network offload applications
  • Deep packet inspection

Documentation

Datasheet V1121-Dual-Channel-10-Gigabit-Ethernet-XMC-Datasheet
Product Image - Featured V1121 Featured
Product Image - Front V1121 Front
Product Image - Back V1121 Back